2019 Land Pride RCD1884

Call for Price


Availability
Brochure
Year
2019
Manufacturer
Land Pride
Model
RCD1884

Overview

Description

Right for the Job.



The RCD1884 is a smooth-top, offset cutter thatperforms best in grass-only applications. Being dual spindle, the cutter is shorter in length than single spindle 84" cutters; the reduced length allows for better maneuverability in tight spaces. The 10" offset makes the RCD1884 a good solution for applications that require cutting close to buildings, fences, or other obstacles that might be found in orchards, parks, or rights-of-way. Deep-deck design, All-welded deck, Short coupled for tight spaces and Clevis-style hitches for easy hook-up.

Features
  • Surpassed rugged industry standards: All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
  • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity.
  • Gearbox Seal Protection: Gearbox bottom seal protection for longer bearing life.
  • Cat. 3 main driveline with 2-plate slip-clutch: 2-Plate slip-clutch protect driveline and gearboxes. slip-clutch is more convenient than shear bolt for continual work.
  • Shock absorbing flex-coupler between main and side gearboxes: Protects intermediate drive shaft and side gearbox from hard objects in the blade path.
  • 10" Deck offset to the right: Allows the operator to cut closer to bodies of water, drainage ditches, roadways and objects such as fence lines, guard rails, buildings, and trees.
  • Lower clevis type 3-Point hitch: Allows for ease of hook-up to tractor. Also adds additional strength allowing for an even pull from the tractor’s lower arms, vs. pulling on a single pin design.
  • Smooth deck top: Reduces accumulation of debris and is easier and faster to clean.
  • Fully welded 10 gauge deck: Fully welded deck adds additional strength to the deck. 10 Gauge decks can withstand more abuse than decks with lighter gauge.
  • Box tubing deck supports: Makes for a stronger rigid deck.
  • Round back design: Helps discharge grass better than enclosed or partially enclosed cutters.
  • 11 5/8" Deck Height: Allows cutter to handle heavy cutting conditions.
  • 1 1/2" to 12" Cutting height: Provides for a wide range of cutting conditions.
  • Skid shoes: Provides sidewall reinforcement and protection to bottom of sidewall.
  • 1/2" x 4" Heat-treated free swinging blades: Free swinging protects from obstructions. Heat-treated offers longer life.
  • 1/2" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper and gearbox output shaft.
  • Splined blade bar hub: Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft.
  • Stump jumper: Standard round stump jumper slides over stumps, rocks, and debris.
  • Front and rear guarding: Protect against flying debris. Optional front rubber or single chain guarding. Standard rear metal band or optional rear extended metal guarding.
  • Optional 15" Laminated tailwheel, or 4" x 16’ Molded rubber: Laminated material is long lasting in rough conditions and can’t go flat. Molded Rubber Can’t go flat.
Specifications
  • Model Number: RCD1884
  • Machine Weight with Dual Laminated Tailwheels: 900 lbs.
  • Hitch: Category l with clevis type lower links and floating top linkage. Quick Hitch adaptable
  • Cutting Width: 84"
  • Overall Width: 86 9/16"
  • Overall Length: 80 9/16"
  • Offset Distance to the Right: 10"
  • Deck Height at Rear: 11 5/8"
  • Cutting Height: 2" - 12"
  • Cutting Capacity: 1 1/2" Diameter
  • Recommended Tractor Power Take-Off Horsepower: 35-60 horsepower
  • Power Take-Off: Speed 540 rpm
  • Gearbox: 60 Hp main gearbox & 45 horsepower side gearbox With speed-up beveled gears, cast iron housing, and 1.67" output shaft
  • Gearbox Lubricant: EP 80-90W oil
  • Gearbox oil Capacity: Main Gearbox:4.7 pints; Side Gearbox: 3.5 pints
  • Deck Construction: All welded deck
  • Deck Material Thickness: 10 Gauge
  • Side Skirt Material Thickness: 10 Gauge
  • Skid Shoe Construction: 3/16" Weld-on with mounting holes for adding optional bolt-on replaceable shoes
  • Stump Jumper: 10 Gauge x 24" Round dish pan with 1" x 4" x 19 1/2" blade bar
  • Blades (4): 1/2" x 4" x 16" Heat treated alloy steel free-swinging suction blades
  • Blade Overlap: 5"
  • Blade Bolts: Keyed with harden flat washers & locknuts.
  • Blade Tip Speed: 11,693 fpm
  • Main Driveline: ASAE Category 3
  • Main Driveline Protection: 2 plate slip clutch
  • Tailwheel Mount: Caster fork with 360 degree swivel
  • Tailwheel: Optional two 15" laminated tire or two 4" x 16" molded rubber tire.
  • Front Guard: Optional 4" x 6" molded rubber or single chain guard
  • Rear Guard: Standard metal band or optional metal extended guard
  • Machine Weight with Dual Solid Tailwheels: 905 lbs.

Specs

General

Working Width
84 in.
Width
86 9/16 in.
Length
80 9/16 in.
Weight
Dual Laminated Tailwheels: 900 lb.; Dual Solid Tailwheels: 905 lb.
Recommended HP
35-60 hp

Related Products